Qlogic Fibre Channel HBA and VM Informacje Techniczne Strona 49

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 92
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 48
3 From the Emulex main menu:
a Select the same adapter.
b Select <1> Configure Boot Devices.
c Select the location for the Boot Entry.
d Enter the two-digit boot device.
e Enter the two-digit (HEX) starting LUN (for example, 08).
f Select the boot LUN.
g Select <1> WWPN. (Boot this device using WWPN, not DID).
h Select <x> to exit and <Y> to reboot.
4 Boot into the system BIOS and move Emulex first in the boot controller sequence.
5 Reboot and install on a SAN LUN.
Chapter 5 Using Boot from SAN with ESX Systems
VMware, Inc. 49
Przeglądanie stron 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 91 92

Komentarze do niniejszej Instrukcji

Brak uwag